Posts Tagged ‘Boat Name’
This Ericson Model II has been stripped to the bare essentials for her two previous TransPac races. Photos show the interior has been altered and most of the excessive weight removed from cabinetry and built-in woodwork. The interior has been painted and is clean and functional. There is no head, hot water nor holding tank.
There are a total of seven sail bags and two spinnaker/whisker poles. She has a mid-nineties Yanmar 2GM cylinder diesel mounted in the mid-salon for best weight distribution. Newer stainless fuel tank.
Reduced for summer!
Our crew spent more than sixteen weeks and a couple thousand man-hours taking her exterior down to wood, making cosmetic repairs and prepping “Crystal Sea” for a full professional refinishing. From keel to anchor light she’s been faired, primed, sprayed, varnished and top coated.
Now, all of that tedious and time-consuming hand labor is finished, and you can be the proud owner of this true Northwest classic motoryacht that turns heads at every moorage as she arrives.
A very spacious motorsailer with great possibilities for live-aboards or weekends on the water.
Her interior has just been thoroughly deep cleaned. All lockers, bunk boards, cubbys and cabinets have been repainted inside.
The teak in the the galley, all woodwork and storage cabinets cleaned and oiled. All of her bunk and settee cushions were were sent out and professionally cleaned as well.
Pedestal steering in her large cockpit, modest and functional electronics, with roller furling and a Perkins 4-107 diesel.
A solid, reliable and roomy boat … at a very good price!
This outstanding ChrisCraft is built on the design of the Unilfite “Yacht Fisherman” hull which is well known for being rugged and very seaworthy.
When ChrisCraft acquired the hull molds in 1984, they also modified the interior design to create more livable space, and incorporated an island queen berth in both of the staterooms forward and aft.
This 48′ model (52′ with pulpit and swim platform) was later designated as a “480 Catalina” in the 1987 model from ChrisCraft.
Fiberglass hull, LOA 40′, 12′ beam, 2′ 10″ draft. This vessel is of houseboat design.
She has a large main cabin with helm forward to starboard, midship starboard side galley complete with table and chairs, and a settee bench to port. There are port and starboard cabin sliding entry doors to access the bow, and sidedecks. The aft cabin has a sliding double berth to port with storage below it, and shelving on starboard side. The portside head has a tub and shower, sink and vanity.
This 40 VIKING SportFisher is part of a long line of time-tested Offshore winners. Famous VIKING stability, comfort and performance are combined with 1970’s styling.
HUGE cockpit, Fly-bridge, Open salon/pilot house, tuna tower helm steering and engine controls.
Add impressive economy, Made-in-USA GM Diesel engines & Twin Disc gears that are paired with Mathers MicroCommander engine controls. These “top choice of pros” are in 4 locations, lower helm, aft deck, bridge and top of tower.
You’ll know “THUMBS UP” is on your side!
This Tournament 400 Luhrs convertible sportfisherman has aggressive lines and comfortable accommodations. With her rakish flybridge and black wraparound deckhouse mask, the Luhrs 400 has a very distinctive profile.
Her two stateroom interior is an ‘open arrangement’ with L-shaped dinette in the salon, and bright galley a few steps below. The forward stateroom has an offset double berth, and over/under bunks are fitted in the guest cabin.
Fishing accessories in the cockpit include fresh and saltwater washdowns, an in-deck fish box, built in bait well in transom, rocket launchers, and flush rod holders. The flybridge is notably large compared to other convertibles of her size. Twin 454 gas engines provide 350 hp with a cruising speed around 15 knots, and a top speed at 22 knots.
Clarke Ryder, renowned builder of classic sailing boats, wrote about this 39′ Southern Cross:
“In 1980, to confirm theories as to how ancient mariners managed long sea journeys before sophisticated instruments were developed, Explorer Marvin Creamer commissioned our Bristol shop to build “NavStar”, a special factory finished Southern Cross 39. The 39 was designed by US Naval Academy marine architect Thomas Gillmer. Tom had designed the Seawind Ketch, the first fiberglass sailboat to sail around the world. Marvin successfully completed his historic trans-Atlantic voyage with no navigational instruments, just a thumb and a forefinger. (One would think that if you headed east from Newport you would eventually bump into something, but maybe it’s more complicated than that.) Marvin bumped into West Africa, confirming his theory. After completing this voyage, Navstar was upgraded with modern navigation equipment and many other conveniences.
A very clean Avanti Sunbridge, great for famiy cruising and weekends overnight. Twin OMC V-8 power and Cobra outdrives with low engine hours, plus an Onan 4.5 kw genset.
Hot water forced air heat for chilly nights. A very popular Bayliner model with master stateroom double berth and aft double berth to sleep four adults.
Spacious aft deck for fishing, great engine access and a full canvas cockpit enclosure. Bottom paint and hull waxed last summer and a hull survey is available for review.
Come take a look!
Please call Jim at 253.332.5813 to inspect this boat.
A very beautiful, sleek model designed by Phillipe Briand and built by Jenneau. She has been impeccably maintained by former owners with consistent attention to regular maintenance and upkeep. A very rare boat, seldom ever seen in the Northwest.
Entering from the cockpit to the main salon with dining settee on the port side and an auxiliary helm station and nav table to starboard. The settee seats six in comfort and the table drops to form a large double berth. The galley is forward to stbd., with the head to port and the master stateroom double berth forward. There is also a double sized quarter berth to starboard beneath the cockpit, and all have custom mattresses for a comfortable night.